Motorola 2247-N8 Specifications download pdf (Page 57)

log message_string

Adds the message in the

message_string

argument to the Motorola Netopia® Gateway diagnostic log.

loglevel [ level ]

Displays or modifies the types of log messages you want the Motorola Netopia® Gateway to record. If you enter

the

loglevel command without the optional

level

argument, the command line interface displays the cur-

rent log level setting.

You can enter the

loglevel command with the

level

argument to specify the types of diagnostic messages

you want to record. All messages with a level number equal to or greater than the level you specify are recorded.

For example, if you specify loglevel 3, the diagnostic log will retain high-level informational messages (level 3),

warnings (level 4), and failure messages (level 5).

Use the following values for the

level

argument:

◆ 1 or low – Low-level informational messages or greater; includes trivial status messages.

◆ 2 or medium – Medium-level informational messages or greater; includes status messages that can help

monitor network traffic.

◆ 3 or high – High-level informational messages or greater; includes status messages that may be significant

but do not constitute errors.

◆ 4 or warning – Warnings or greater; includes recoverable error conditions and useful operator informa-

tion.

◆ 5 or failure – Failures; includes messages describing error conditions that may not be recoverable.

netstat -i

Displays the IP interfaces for your Motorola Netopia® Gateway.

netstat -r

Displays the IP routes stored in your Motorola Netopia® Gateway.

nslookup [ hostname | ip_address ]

Performs a domain name system lookup for a specified host.

◆ The

hostname

argument is the name of the host for which you want DNS information; for example,

nslookup klaatu

◆ The

ip_address

argument is the IP address, in dotted decimal notation, of the device for which you want

DNS information.

ping [-s size] [-c count ] [ hostname | ip_address ]

Causes the Motorola Netopia® Gateway to issue a series of ICMP Echo requests for the device with the specified

name or IP address.

◆ The

hostname

argument is the name of the device you want to ping; for example,

ping ftp.motorola.com

◆ The

ip_address

argument is the IP address, in dotted decimal notation, of the device you want to locate. If

a host using the specified name or IP address is active, it returns one or more ICMP Echo replies, confirming

that it is accessible from your network.

◆ The

-s

size

argument lets you specify the size of the ICMP packet.

◆ The

-c

count

argument lets you specify the number of ICMP packets generated for the ping request. Values

greater than 250 are truncated to 250.

1 ... 56 57 58 ... 108

Comments to this Manuals

No comments

Motorola 2247-N8 Specifications Page 57

Comments to this Manuals

Related products and manuals for Gateways/controllers Motorola 2247-N8