Motorola 2247-N8 Specifications download pdf (Page 66)

Administrator’s Handbook

option (off) [on | off]: on

You can accept the default value for a field by pressing the Return key. To use a different value, enter it and press

Return.

You can enter the CONFIG step mode by entering

set

from the top node of the CONFIG hierarchy. You can enter

step mode for a particular service by entering

set

service_name

. In stepping set mode (press Control-X

<Return/Enter> to exit. For example:

Netopia-3000/9437188 (top)>> set system

...

system

name (“Netopia-3000/9437188”): Mycroft

Diagnostic Level (High): medium

Stepping mode ended.

Validating Your Configuration

You can use the validate CONFIG command to make sure that your configuration settings have been

entered correctly. If you use the

validate command, the Motorola Netopia® Gateway verifies that all required

settings for all services are present and that settings are consistent.

Netopia-3000/9437188 (top)>> validate

Error: Subnet mask is incorrect

Global Validation did not pass inspection!

You can use the validate command to verify your configuration settings at any time. Your Motorola Netopia®

Gateway automatically validates your configuration any time you save a modified configuration.

1 ... 65 66 67 ... 108

No comments

Motorola 2247-N8 Specifications Page 66