Motorola 2247-N8 Specifications download pdf (Page 67)

CONFIG Commands

This section describes the keywords and arguments for the various CONFIG commands.

Connection commands

conns are used to create connections, for example, a WAN or LAN conn. There may be more than one of each

depending on your model. names correspond to the system object IDs (OIDs) but you can name them yourself.

set conn name name link-oid value

Sets the connection named name to point to an associated link specified by the link-oid value.

set conn name name type [ static | dhcpc ]

Specifies whether the type of the connection named name is static or dhcpc.

set conn name name side [ lan | wan ]

Specifies whether this conn is LAN- or WAN-side. A conn can be either lan or wan.

set conn name name dhcp-server-enable [ on | off ]

Turns the DHCP server for this connection on or off. The DHCP server can be enabled per connection. The

default is on.

set conn name name mcast-forwarding [ off | on ]

Turns IP IGMP multicast forwarding for this connection off or on. The default is off.

set conn name name static ipaddr ipaddr

Specifies a static IP address when the connection type has been set to static. The default is 192.168.1.254

set conn name name static netmask netmask

Specifies a static netmask when the connection type has been set to static. The default is 255.255.255.0.

set conn name name dhcp-server start-addr ipaddr

If dhcp-server-enable is set to on, specifies the first address in the DHCP address range. The Motorola Netopia®

Gateway can reserve a sequence of up to 253 IP addresses within a subnet, beginning with the specified address

for dynamic assignment. The default is 192.168.1.200

set conn name name dhcp-server end-addr ipaddr

If dhcp-server-enable is set to on, specifies the last address in the DHCP address range. The default is

192.168.1.240

set conn name name dhcp-server lease-time seconds

If dhcp-server-enable is set to on, specifies the default length for DHCP leases issued by the Motorola Netopia®

Gateway. Lease time is in seconds. Default is 3600.

1 ... 66 67 68 ... 108

No comments

Motorola 2247-N8 Specifications Page 67