47
LED Function Summary Matrix
If a status indicator light does not look correct, look for these possible problems:
Power DSL Internet
Unlit No power No signal Not connected
Solid Green Power on DSL line synched with the
DSLAM
Connected to the Internet
Flashing Green N/A Activity on the DSL cable Transmitting or receiving
data on the WAN port
Solid Red System malfunction N/A N/A
Flashing Red Updating embedded soft-
ware
N/A N/A
Ethernet 1, 2, 3, 4 WPS Wireless
Unlit No signal No wireless signal No wireless signal
Solid Green Synched with Ethernet
card
WPS exchange with
client is successful
N/A
Flashing Green Activity on the Ethernet
cable
N/A Activity on the wireless
LAN
Solid Red N/A N/A N/A
Flashing Red N/A N/A N/A
If LED is
not Lit
Possible problems
Power
◆ Make sure the power switch is in the ON position.
◆ Make sure the power adapter is plugged into the DSL Gateway properly.
◆ Try a known good wall outlet.
◆ Replace the power supply and/or unit.
DSL
◆ Make sure that any telephone has a microfilter installed.
◆ Make sure that you are using the correct cable. The DSL cable is the thinner stan-
dard telephone cable.
◆ Make sure the DSL cable is plugged into the correct wall jack.
◆ Make sure the DSL cable is plugged into the DSL port on the DSL Gateway.
◆ Make sure the DSL line has been activated at the central office DSLAM.
◆ Make sure the DSL Gateway is not plugged into a micro filter.
Comments to this Manuals