Motorola 2247-N8 Specifications download pdf (Page 58)

Administrator’s Handbook

You can use the ping command to determine whether a hostname or IP address is already in use on your net-

work. You cannot use the

ping command to ping the Motorola Netopia® Gateway’s own IP address.

quit

Exits the Motorola Netopia® Gateway command line interface.

reset arp

Clears the Address Resolution Protocol (ARP) cache on your unit.

reset crash

Clears crash-dump information, which identifies the contents of the Motorola Netopia® Gateway registers at the

point of system malfunction.

reset dhcp server

Clears the DHCP lease table in the Motorola Netopia® Gateway.

reset enet [ all ]

Resets Ethernet statistics to zero. Resets individual LAN switch port statistics as well as wireless and WAN Ether-

net statistics (where applicable).

reset firewall-log

Rewinds the firewall log to the first entry.

reset ipmap

Clears the IPMap table (NAT).

reset log

Rewinds the diagnostic log display to the top of the existing Motorola Netopia® Gateway diagnostic log. The

reset log command does not clear the diagnostic log. The next show log command will display information

from the beginning of the log file.

reset wan

This function resets WAN interface statistics.

reset wepkeys

This function allows you to force your wireless WEP key settings back to the default values, if there are default val-

ues. For example, on some models, the WEP keys are based on the serial number. This allows you to get back

those default settings if you have changed them without the need to reset the entire configuration of the unit.

restart [ seconds ]

Restarts your Motorola Netopia® Gateway. If you include the optional

seconds

argument, your Motorola Neto-

pia® Gateway will restart when the specified number of seconds have elapsed. You must enter the complete

restart command to initiate a restart.

1 ... 57 58 59 ... 108

No comments

Motorola 2247-N8 Specifications Page 58