Motorola 2247-N8 Specifications Page 64

  • Download
  • Add to my manuals
  • Print
  • Page
    / 108
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 63
Administrator’s Handbook
64
About CONFIG Commands
You reach the configuration mode of the command line interface by typing
configure
(or any truncation of
con-
figure
, such as
con
or
config
) at the CLI SHELL prompt.
CONFIG Mode Prompt
When you are in CONFIG mode, the CLI prompt consists of the name of the Motorola Netopia® Gateway followed
by your current node in the hierarchy and two right angle brackets (>>). For example, when you enter CONFIG
mode (by typing
config
at the SHELL prompt), the Netopia-3000/9437188 (top)>> prompt
reminds you that you are at the top of the CONFIG hierarchy. If you move to the
ip node in the CONFIG hierar-
chy (by typing
ip at the CONFIG prompt), the prompt changes to Netopia-3000/9437188 (ip)>> to
identify your current location.
Some CLI commands are not available until certain conditions are met. For example, you must enable IP for an
interface before you can enter IP settings for that interface.
Navigating the CONFIG Hierarchy
Moving from CONFIG to SHELL — You can navigate from anywhere in the CONFIG hierarchy back to the
SHELL level by entering quit at the CONFIG prompt and pressing Return.
Netopia-3000/9437188 (top)>> quit
Netopia-3000/9437188 >
Moving from
top
to a subnode — You can navigate from the top node to a subnode by entering the node
name (or the significant letters of the node name) at the CONFIG prompt and pressing R
ETURN. For example,
you move to the IP subnode by entering
ip and pressing RETURN.
Netopia-3000/9437188 (top)>> ip
Netopia-3000/9437188 (ip)>>
As a shortcut, you can enter the significant letters of the node name in place of the full node name at the CONFIG
prompt. The significant characters of a node name are the letters that uniquely identify the node. For example,
since no other CONFIG node starts with b, you could enter one letter (“
b”) to move to the bridge node.
Jumping down several nodes at onceYou can jump down several levels in the CONFIG hierarchy by
entering the complete path to a node.
Moving up one nodeYou can move up through the CONFIG hierarchy one node at a time by entering the
up command.
Jumping to the top nodeYou can jump to the top level from anywhere in the CONFIG hierarchy by enter-
ing the
top command.
Moving from one subnode to another — You can move from one subnode to another by entering a partial
path that identifies how far back to climb.
Moving from any subnode to any other subnode — You can move from any subnode to any other subnode
by entering a partial path that starts with a top-level CONFIG command.
Scrolling backward and forward through recent commands — You can use the Up and Down arrow keys
to scroll backward and forward through recent commands you have entered. When the command you want
appears, press Enter to execute it.
Entering Commands in CONFIG Mode
CONFIG commands consist of keywords and arguments. Keywords in a CONFIG command specify the action
you want to take or the entity on which you want to act. Arguments in a CONFIG command specify the values
appropriate to your site. For example, the CONFIG command
Page view 63
1 ... 63 64 65 ... 108

Comments to this Manuals

No comments