Motorola MOTO 9C START (WM6.1) Specifications download pdf (Page 74)

3 - 6 MC9190-G Integrator Guide

Figure 3-8

Connected Window

During the first synchronization, information stored on the MC9190-G is copied to the host computer. When the

copy is complete and all data is synchronized, the MC9190-G can be disconnect from the host computer.

For more information about using ActiveSync or WMDC, start the application on the host computer, then see Help.

Synchronization With a Windows Mobile 6.5 Device

To synchronize with the MC9190-G:

1. Connect the MC9190-G to your computer using the provided USB cable.

2. If the Get Connected window does not appear on your computer, select Start > All Programs > Microsoft

ActiveSync or Windows Mobile Device Center.

3. Click Next.

4. Select the check box to synchronize with a server running Microsoft Exchange if applicable.

5. Click Next.

ActiveSync WMDC

NOTE The first synchronization operation must be performed with a local direct connection. To retain partnerships

after a cold boot, capture partnership registry information in a .reg file and save it in the Flash File System,

detailed information is provided in the EMDK Windows CE Help File for the Motorola MC9190-G.

NOTE When the MC9190-G is connected to your computer and a sync connection is made, the Wi-Fi radio (if

applicable) is disabled. This is a Microsoft security feature to prevent connection to two networks at the same

time.

1 ... 73 74 75 ... 192

No comments

Motorola MOTO 9C START (WM6.1) Specifications Page 74