Motorola MOTO 9C START (WM6.1) Specifications download pdf (Page 50)

2 - 26 MC9190-G Integrator Guide

Figure 2-22

MSR Serial/USB Connection

Battery Charging Indicators

To charge the MC9190-G’s battery through the MSR, connect the power supply to the MSR (see Figure 2-21 on

page 2-25), then attach the MSR to the MC9190-G. The MC9190-G begins charging automatically.

The MC9190-G’s amber charge LED, located in the Indicator LED Bar, shows the status of the battery charging in

the MC9190-G. See Table 2-2 on page 2-9 for charging status indications.

The battery usually charges in less than four hours, if the MC9190-G is not in use.

Serial/USB Connection

The MSR can connect to and communicate with a serial/USB device, such as a printer or host computer, through

its serial port. See Serial Communication Setup on page 2-37 for the host computer communication setup

procedure.

To connect the MSR to a serial/USB device, connect one end of the serial device cable into the serial port on the

MSR and the other end into the serial/USB port on the device.

Using the MSR

The MSR9000 sample application is designed to work with the MSR. This sample application illustrates how an

application should handle MSR inputs (refer to the Symbol Application Guide for Symbol Devices).

To use the MSR:

1. Attach the MSR to the MC9190-G (see Attaching and Removing on page 2-25).

2. Power on the MC9190-G.

To Device

Serial/USB

Port

Serial Port

NOTE Batteries must be charged within the 32° to 104° F (0° to +40° C) ambient temperature range.

NOTE The MSR does not need to be attached to the power supply to read magnetic stripes.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 191 192

No comments

Motorola MOTO 9C START (WM6.1) Specifications Page 50