Motorola MOTO 9C START (WM6.1) Specifications download pdf (Page 61)

Accessories 2 - 37

Serial Communication Setup

The serial communications setup can be used to set up to communicate with a Single Slot Serial/USB Cradle, MSR

or a CAM.

Setting Up a Connection on the MC9190-G (Windows Mobile 6.5)

1. On the MC9190-G tap Start > ActiveSync.

2. Tap Menu > Connections.

3. Select the Synchronize all PCs using this connection check box.

4. Select the connection (e.g., Bluetooth or USB) for synchronization from the drop-down list. The default

connection for synchronization is USB.

5. Tap OK.

6. Ensure that synchronization software is installed on the host computer and a partnership was created.

7. Select Start > All Programs > Microsoft ActiveSync or Windows Mobile Device Center on the host computer,

if it is not already running.

8. In the synchronization window, select File > Connection Settings.

Figure 2-37

Connection Settings Window

9. In the Connection Settings window, select the appropriate check box for the type of connection being used. If

using a serial connection, select the COM port from the drop-down list.

10. Tap OK to save any changes made.

NOTE For serial communication using accessories that can communicate with either a serial or USB connection,

connect only the serial cable. Do not connect both the serial and USB cables. If both serial and USB

communication cables are required, the host computer’s USB port must be disabled in ActiveSync before

serial communication can be enabled.

NOTE Every MC9190-G should have a unique device name. Never try to synchronize more than one MC9190-G

to the same name.

NOTE If serial, USB and Ethernet communication connections are used, all check boxes can be selected to avoid

having to update this window for different connections.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 191 192

No comments

Motorola MOTO 9C START (WM6.1) Specifications Page 61