Motorola MTS HDTV set-top box Technical Information download pdf (Page 22)

MTS HDTV Service

Section 3 – Change and Remove Codes

A. Mode Deactivation

To deactivate a mode key, follow these steps:

1. Press and hold the appropriate mode key (TV, DVD or AUX) on the remote control

2. Without releasing the chose mode key, press and hold the OK key simultaneously

3. Release both the mode key and the OK key – All the mode keys should flash twice

4. Enter the appropriate 4-digit code from the list below depending on the mode you are deactivating:

a. TV 1254

b. DVD 2254

c. AUX 3254

d. The mode key will flash three times indicating correct entry and return to normal operation

e. When an invalid code is entered, the selected mode key will give a long flash to indicate

that you have not entered the code correctly

f. Should the remote control time-out before you complete the setup, you will need to start

over

B. Reassign the Mode Keys to Another Device

The TV, DVD and AUX keys are already set up to control specific devices:

TV key: TV & HDTV

DVD key: DVD

AUX key: VCR, Home Theatre In the Box (HTIB), Receivers and Amplifiers

You may reassign these mode keys to operate another type of device. For example, you can control a

second DVD player in AUX mode, the same way you control the first DVD player in DVD mode.

1. Press and hold the STB key on the remote control

2. Without releasing the STB key, press and hold the OK key simultaneously

3. Release both the STB key and the OK key – All the mode keys will flash twice indicating

programming mode

4. Enter 944 by pressing the number keys on the remote control – All the mode keys will flash twice

indicating correct entry

5. Press the mode key (i.e., TV, DVD or AUX) for the device you would like to reassign

6. Press the mode key you would like to reassign the device to – The selected mode key will flash

three time indicating successful reassignment and return to normal operations

Note: If any other key is pressed except the mode keys the STB key will give a long red flash and the

remote control will return to normal operation. Should the remote control time-out before you complete the

procedure you will need to start over.

Section 4 – Reset the Remote

A. To the Factory Default Settings

1. Press and hold the STB key on the remote control

2. Without releasing the STB key, press and hold the OK key

3. Release both the STB key and the OK key – All four mode keys will flash twice to indicate

programming mode

1 ... 21 22 23 ... 65

No comments

Motorola MTS HDTV set-top box Technical Information Page 22