Motorola MTS HDTV set-top box Technical Information download pdf (Page 21)

MTS HDTV Service

2. Without releasing the STB key, press and hold the OKkey simultaneously

3. Release both eh STB key and the OK key – All the mode keys will flash twice indicating

programming mode

4. Enter 966 by pressing the number keys on the remote control – The STB key will flash twice

indicating correct entry

5. Press the device mode key that you wish to provide channel control

6. Press the ENTER key – The STB key will flash three times indicating successful assignment and

return to normal operation

Note: if you press any key other than the mode keys or ENTER the STB key will give along red flash

and the remote control will return to normal operation. Should the remote control time-out before you

complete the procedure you will need to start over.

C. Power Control Set Up Options

By default, the POWER key only powers ON or places your Receiver in Standby mode. Unless you have

programmed the TV mode key then the TV and Receiver will both be powered ON/OFF simultaneously. You

also have the option to turn ON/OFF TV, DVD and AUX mode devices individually be pressing the

applicable mode key then the POWER key.

To Have Multiple Devices Power Off with the Power Key

If you would like other devices to be powered ON/OFF simultaneously with the POWER key then follow

these instruction for the additional devices (for a total of 4).

1. Press and hold the STB key on the remote control

2. Without releasing the STB key, press and hold the OK key simultaneously

3. Release both the STB key and the OK key – All the mode keys will flash twice indicating

programming mode

4. Enter 977 by pressing the number keys on the remote control – The STB key will flash twice

indicating correct entry

5. Press the STB key on the remote control – The STB key will flash twice indicating correct entry

6. Press the TV key on the remote control – The TV key will flash twice indicating correct entry

7. Press each additional mode key that you wish to include such as the DVD key or AUX key

a. The selected mode key will flash twice indicating correct entry

b. If you want to include both mode keys repeat step 7 selecting thee other mode key

8. Press the ENTER ke

y to complete – The last mode key selected will flash tree times indicating

successful assignment and return to normal operation

Note: If you press any key other than the mode keys of ENTER the STB key will give a long red flash and

the remote control will return to normal operation. Should the remote control time-out before you complete

the procedure you will need to start over.

If the devices that you have programmed to turn ON/OFF at the same time get out of sync so that some turn

ON and others turn OFF you will need to manually turn OFF the out of sync devices and then press the

POWER key to turn them all back ON. It is important to point the remote directly toward the devices for this

to work properly.

To change the number of devices controlled by the POWER key, you must start at Step 1 and continue until

all desired devices have been programmed.

1 ... 20 21 22 ... 65

Comments to this Manuals

No comments

Motorola MTS HDTV set-top box Technical Information Page 21

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Motorola MTS HDTV set-top box