Motorola MVME167 User Manual download pdf (Page 38)

Data LAN

38 of 56 ICD-13/05 ICD 13—Standard Controller

• CPU: Baja4700-175-16MB-1FL

• PMC card: 1409002

• Serial/Ethernet cable: 340A003-54

• Fast ethernet Cable: 308A002-36

15.2 Installation

A VxWorks boot ROM must be obtained from either Heurikon or the IGPO and

installed into socket U40 on the board. The ROM should be labelled “Baja4700

VxWorks 5.2 006AA00102 68BF”.

The Baja4700 is not the VME bus master, and jumper J8 should be removed. The other

jumers are factory-default and are listed in Table 30.

The Digital Fast EtherWorks PMC card is installed by first removing the faceplace for

PMC Mod 1. Unscrew the two screws holding the faceplate to the main board. Position

the PMC card with the aluminium face through the empty faceplate hole and the PMC

sockets over the 3 plugs on the main board. Firmly seat the card onto the main board.

Screw the card down through the four screw at either corner of the PMC card.

TABLE 29. Digital 100Base-TX PMC Specifications

Item Description

Model Number Fast Etherworks DE520-AA

Manufacturer Digital Equipment Corporation

Dimensions 1 PMC slot

Connections 1 100BaseTX

Power +5V, 0.75A; 3.75W

OperatingTemperature 0to60degreeC

Humidity 5 to 95% non-condensing

TABLE 30. Heurikon Baja4700 Jumpers

Jumper Position Remark

J1 off Remove for 802.3 Ethernet

J2 2-3 RS-232 +12V handshake

J3 2-3 Do not change

J4 1-2 Do not change

J5 1-2;3-4 Boot from EPROM

J6 2-3 RTC backup power lithium battery

J7 1-2 Sanity timer disabled

J8 off System controller disabled

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

No comments

Motorola MVME167 User Manual Page 38