Motorola MVME167 User Manual download pdf (Page 30)

Digital Output Module

30 of 56 ICD-13/05 ICD 13—Standard Controller

12.0 Digital Output Module

A Digital Output card is also available for driving higher voltage or power outputs, typ-

ically to operate relays or solenoids.

12.1 Description

The Standard Controller digital output module is the Xycom XVME-220. The card is

supplied with a manual which describes the connections and jumper settings, program-

ming interface and full circuit diagrams[15]. This card provides 32 opto-isolated open-

collector outputs.

12.2 Installation

Only a single XVME-220 card is assumed in the standard EPICS distribution although

more are allowed. See the manual page 2-2 for a diagram giving the jumper and switch

locations, which should be set as follows:

TABLE 19. Digital Output module specifications

Item Description

Model Number XVME-220

Manufacturer Xycom

Input Power 5 Volts @ 1.62 Amps (typ.).

Connections 2 off IDC50 plugs on front panel.

Output Characteristics I

= 100 mA max.

= 30 Volts max.

Dimensions 1 slot x 6U

Operating Temperature 0° to 65° C

Humidity 5% to 95% non-condensing

TABLE 20. XVME-220 Switch and Jumper Setting

J/S Configures Setting

S1 1 A10 Closed

2A11 Open

3A12 Closed

4A13 Closed

5A14 Open

6A15 Open

7 User Mode Access Closed

8 Short Address Closed

J2 Short Address B

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 55 56

No comments

Motorola MVME167 User Manual Page 30