Motorola MVME167 User Manual download pdf (Page 28)

TTL I/O Card

28 of 56 ICD-13/05 ICD 13—Standard Controller

input signals (connector JK1), and ports 4 to 7 as outputs (JK2), and does not support

the use of the Interrupt Input or Flag Output Lines.

1. At power-up, the FAIL LED will be on, and PASS off.

2. Check communication with the card and the operation of the PASS and FAIL LED’s:

167-Bug>M FFFFD081;B

FFFFD081 00? 1=

• Both LED’s off

FFFFD081 01? 2

• Both LED’s on

FFFFD081 02? 3.

• PASS on, FAIL off

3. Read the card identifier block:

167-Bug>MD FFFFD000:20

FFFFD000 FF56 FF4D FF45 FF49 FF44 FF58 FF59 FF43 .V.M.E.I.D.X.Y.C

FFFFD010 FF32 FF34 FF30 FF20 FF20 FF20 FF20 FF31 .2.4.0.....1

FFFFD020 FF20 FF31 FF31 FF20 FF00 FF00 FF00 FF00 . .1.1. ........

FFFFD030 FF00 FF00 FF00 FF00 FF00 FF00 FF00 FF00 ................

Test all bits in the Flag Output and Data Direction registers:

167-Bug>M FFFFD086

FFFFD086 0000? 1=

FFFFD086 0001? 2

FFFFD086 0002? 4

FFFFD086 0004? 8

FFFFD086 0008? 10

TABLE 18. XVME-240 Switch and Jumper Settings

J/S Configures Setting

S1 1 IRQ0 Closed

2IRQ1 Closed

3IRQ2 Closed

S2 1 A10 See Text

2A11 Closed

3A12 Open

4A13 Closed

5A14 Open

6A15 Open

7 User Mode Access Closed

J2 Short Address B

J3-10 Interrupt Inputs Not Used

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 55 56

No comments

Motorola MVME167 User Manual Page 28