Motorola PTP 500 User Manual download pdf (Page 12)

Mast, Tower or Building Installation

Step 2: Offer the ODU (with pre-fitted mounting bracket) to the bracket strap and affix using

the captive M8 bolt. Tighten to ensure the assembly grips, but can be adjusted on the pole.

Step 3: Adjust the elevation and azimuth of the unit before tightening to the required torque

settings of 14 Nm (11 lbft) for both bolts.

CAUTION: Attach the free end of one earth bonding lead (large tag M10) to the tower metal

work. On no account must this be attached to the mounting bracket bolts.

More information:

PTP 300 Series User Guide

or PTP 500 Series User Guide

Section: “Mounting the ODUs”

WARNING: A cable measuring card must NEVER be used at the ODU end connected to

power from the PIDU. It must only be used at the bottom of the mast with a multimeter.

This is because the PIDU voltage exceeds the limit allowed in some countries for safe

handling in wet conditions and therefore may create a safety hazard.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

No comments

Motorola PTP 500 User Manual Page 12