Motorola PTP 500 User Manual download pdf (Page 11)

Mast, Tower or Building Installation

Mast or Tower Installation Instructions

The ODU is pre-fitted with a mounting bracket (designed to ease installation) and with an earth

bonding lead.

WARNING: When mounting the ODU, observe the following precautions against failure of

the assembly:

• Do not remove the pre-fitted mounting bracket from the ODU.

• Do not mount the ODU on poles with diameter less than 50mm (2”) or greater than

75mm (3”). The ODU mounting bracket is designed to work only with poles with

diameter in the 50 mm (2”) to 75 mm (3”) range.

• Do not over-tighten the bolts.

The ODU must be mounted using the following steps, ensuring that the cable entry is at the

bottom:

Step 1: Attach the bracket strap to the pole using M8 x 70 mm bolts, M8 flat washers and

M8 coil washers. Tighten to ensure the assembly grips but can be adjusted.

1 ... 10 11 12 ... 26

No comments

Motorola PTP 500 User Manual Page 11