Motorola MICROTAC DPC 650 Owner's Manual download pdf (Page 58)

Cellular System Information

Two-System Operation

Your cellular telephone is equipped with a feature that

allows you to maintain two telephone numbers from two

different system operators. Both are designated as your

‘home system’ but are accessed separately. At the time

your phone was programmed, you elected whether to

enable this feature and which two systems would be

treated as your home systems.

While you may switch from one system to the other, only

one of the two can be active at any given time. Calls are

placed and received through the active system only.

To switch from one system to the other:

1. Press , , .

2. The display will blank to conﬁrm the switch and the

newly activated number will appear.

3. When you have ﬁnished viewing, press .

If you have two phone numbers programmed into your

phone, each time the phone is turned on, it displays a

message indicating which home system type and phone

number is currently active. Possible messages are as

follows:

If a call is placed to the inactive phone number, the caller

will receive the “Not in Service” message.

System Type and Phone Number Display

Non-wireline (A type) with phone number 1

Non-wireline (A type) with phone number 2

Wireline (B type) with phone number 1

Wireline (B type) with phone number 2

RCL STO

CLR

MicroTAC_Book Page 44 Thursday, October 16, 1997 1:30 PM

Black spot 45.0° 169.71 LPI

1 ... 57 58 59 ... 81

No comments

Motorola MICROTAC DPC 650 Owner's Manual Page 58