Motorola MICROTAC DPC 650 Owner's Manual download pdf (Page 32)

Advanced Memory Dialing Features

Storing a One Touch Dialing Number

1. Enter the phone number to be stored.

2. Press .

3. Press the speciﬁc One Touch Dialing Key.

4. The phone will conﬁrm storage by displaying

StorEd

Displaying One Touch Dialing Numbers

Press and the speciﬁc One Touch Dialing Key.

The display will show the number associated with the One

Touch Dialing Key,

Deleting One Touch Dialing Numbers

1. Press and hold , then press and the speciﬁc

One Touch Dial Key.

2. Press again. The display will ﬂash

FULL

, then

alternate between the number stored there and

ChAngE?

3. Press to delete the number.

Turbo Dial Feature

Press and hold either of the Turbo Dial keys

through for one second.

Once numbers have been stored in Memory Locations 02

through 09, calls can be placed from these numbers by

pressing and holding the associated key for approximately

one second. A call will be placed to the phone number

stored in that memory location, but the number will not be

displayed. There is no need to press .

NOTE

Memory Location 01 is reserved for Emergency

Dialing (if the Emergency Dialing feature is enabled; refer

“Selecting and Deselecting Features” on page 32

STO

RCL

CLR STO

STO

SND

MicroTAC_Book Page 18 Thursday, October 16, 1997 1:30 PM

Black spot 45.0° 169.71 LPI

1 ... 31 32 33 ... 81

No comments

Motorola MICROTAC DPC 650 Owner's Manual Page 32