Motorola MICROTAC DPC 650 Owner's Manual download pdf (Page 28)

Storing Numbers in Memory

Deleting a Memory Entry

1. Press and hold , then press , and enter the

two-digit location number you wish to delete.

2. The phone will display

FULL

, ﬂash the number in

memory, followed by

ChAngE?

3. Press to delete, or press to exit without

deleting the entry.

Changing a Memory Entry

1. Press and the two-digit location number so that

the number to be changed is displayed.

2. Repeatedly press to “back out” each of the digits

displayed (all the digits, or just the ones you wish to

change).

3. Enter the new digits.

4. Press and the same two-digit location number.

5. The location number and

FULL

will display. The

display will then alternate between the currently

stored number and

ChAngE?

6. Press to save the newly entered number in this

memory location, overwriting the currently stored

number.

CLR STO

STO END

RCL

CLR

STO

MicroTAC_Book Page 14 Thursday, October 16, 1997 1:30 PM

Black spot 45.0° 169.71 LPI

1 ... 27 28 29 ... 81

No comments

Motorola MICROTAC DPC 650 Owner's Manual Page 28