Motorola MICROTAC DPC 650 Owner's Manual download pdf (Page 23)

Basic Operation

Call In Absence Indicator

If your phone is on and an incoming call is unanswered,

CALL

is displayed for 16 seconds. The display and keypad

backlight will then extinguish to conserve the battery level.

Pressing any key but or redisplays

CALL

inform you of the call attempt. You must press or

to cancel the message and clear the display.

NOTE

Unless you have subscribed to Calling Line ID, the

phone will not display or retrieve the phone number of the

calling party.

Signal Strength Meter

The Signal Strength Meter (SSM) indicates the relative

strength of the signal received by your phone. The SSM is

displayed as shown below. The alone represents the

lowest strength, with each additional representing a

stronger signal.

The SSM appears every time you turn your phone on. After

the display blanks out (after about 16 seconds), the SSM

will “strobe” to indicate that the phone is on. To redisplay

the SSM press any key.

To best utilize the SSM, you should familiarize yourself

with the relative signal strength levels and their associated

call placement and call-in-progress qualities.

Any messages, such as

Loc d

, appearing in the display as

a result of activation of a feature will take priority over

SSM. You will not see the SSM displayed in these cases.

CLR END

Weak Signal Strong Signal

MicroTAC_Book Page 9 Thursday, October 16, 1997 1:30 PM

Black spot 45.0° 169.71 LPI

1 ... 22 23 24 ... 81

No comments

Motorola MICROTAC DPC 650 Owner's Manual Page 23