Motorola MICROTAC DPC 650 Owner's Manual download pdf (Page 37)

Advanced Memory Dialing Features

Now that the Memory Linked number has been created

and stored in memory, you may place the call as follows.

1. Press , 2-digit location number, and . (Your

phone will send the bank’s phone number, and then

wait at the ﬁrst pause.)

2. When the system answers and prompts you for your

bank PIN code, simply press , to transmit

your bank PIN code and # sign.

3. When the system prompts you for your account

number, press , again to transmit your

account number and # sign.

NOTE

If the security PIN code feature is activated (see

“PIN Code Operation” on page 30), the security PIN code

will automatically be sent after the ﬁrst pause by pressing

. Do not add your security PIN code to the linked

sequence.

NOTE

If you have divided your Memory Linked number

into two memory locations (e.g., 03 and 04), place the

initial call by pressing

, ,

, . When the

system answers and prompts you, press

, ,

to send the ﬁrst number group (up to the pause).

Press , to send each remaining number group

stored in location 04.

NOTE

Some electronic systems require that DTMF tones

be sent for several seconds by pressing and holding a key.

These signals, known as Long Tone DTMF, cannot be

transmitted using Memory Linking. If Long Tone DTMF

signals are required, you must send them manually

5 Enter the account number and # sign—

, ,

7o8

88Co22c

6 To store the number, press and

the two-digit location number.

Instruction and Key Sequence Display

2 2

STO

RCL SND

SND

RCL 0 3 SND

RCL 0 4

RCL SND

MicroTAC_Book Page 23 Thursday, October 16, 1997 1:30 PM

Black spot 45.0° 169.71 LPI

1 ... 36 37 38 ... 81

Comments to this Manuals

No comments

Motorola MICROTAC DPC 650 Owner's Manual Page 37

Comments to this Manuals

Related products and manuals for Mobile phones Motorola MICROTAC DPC 650