Motorola LM100 Operations Instructions download pdf (Page 53)

GX2-LM1000E* Installation and Operation Manual

Appendix A

Specifications

Specifications for the GX2-LM1000E* are valid over the given bandwidth and operating

temperature range listed in this section. The current Motorola Product Catalog may contain

additional information not listed below.

RF bandwidth 47 through 1002 MHz

RF input impedance 75 Ohms

RF input return loss

47-870 MHz

870-1000 MHz

16 dB minimum

14 dB minimum

Broadcast input-analog

+15 ±0.5 dBmV/ch for 79 NTSC channels plus 320 MHz of digital at −6 dBc

Narrowcast input 6 dB above broadcast input level

Main RF input test point

−20 ±0.5 dB relative to main RF input port

AGC range 12 dB (2 dB below the nominal input to 10 dB above the nominal input

Optical

Optical wavelength

1310 nm ±20 nm

Laser shutdown Enable/disable through the control module, SDU, or network management

software

Eye protection Optical safety shutter

Optical power See Appendix A, Table A-1 for the optical output power of each GX2-LM1000E*

model.

Power

Power consumption 18 W maximum, 13 W typical

Environmental

Operating temperature range

−20°C to +60°C (−4°F to +149°F)

Storage temperature range

−40°C to +80°C (−40°F to +176°F)

Over temperature laser

protection

Software and hardware active

Physical

Dimensions

1”W × 5.9”H × 14.6”D (2.5 cm × 15 cm × 37.1 cm)

Weight 2.2 lbs. (1 kgs)

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59 60 61

No comments

Motorola LM100 Operations Instructions Page 53