Motorola AP6562 Installation Guide download pdf (Page 11)

Installation Guide 11

The extension arm kit can also be used in combination with the any of the brackets from the mounting bracket kit.

The following ancillary hardware to attach the extension arm to the mounting bracket kit sections is included in

the extension arm kit:

2.3.3 Pole Mounted Installations

The mounting hardware kit and extension arm can be used in various combinations to properly install the AP6562

on a pole. For poles of up to 3 inches in diameter, attach the pole mount bracket of the mounting hardware kit at

the desired position on the pole using band clamps up to 3/4 inch width, or a 1/2 inch x 4 inch wide U-bolt and

nuts. For poles greater than 3 inches in diameter, attach the pole mount bracket using band clamps.

Description Quantity

1/2 inch hex head nut 2

1/2 inch x 3/4 inch hex head bolt 2

NOTE The U-bolt and band clamps are not included in the mounting bracket kit.

1 ... 10 11 12 ... 48

No comments

Motorola AP6562 Installation Guide Page 11