Motorola BC796D User's Guide download pdf (Page 25)

ScanControl

One Program, Multiple Scanners, Made in USA

the Trunked Bank being programmed. If the Control Channel is not being received by

the radio an error message will be displayed indicating that the particular Trunked Bank

cannot be programmed with Talkgroup IDs. This button is disabled if no radio is

connected.

OPERATING TIP: If you are not within receiving range of the Control Channel you can

enter the frequency of a local, known good Control Channel for a similar radio system into

the bank, program the channels for the Bank and then program the Talkgroups for the

Bank. This “fools” the radio into thinking it has a Control Channel while you are

programming the Talkgroups. Once the Talkgroups are programmed into the Radio you

can Lockout the “Dummy” Control Channel in the Bank.

o Load All ScanLists Button - Click to copy all ScanList Talkgroup IDs for the selected

Bank from the scanner’s radio memory to the ScanControl Memory Area. NOTE: For

the BC245XLT, BC895XLT and the PRO2052 this function will only be successful if

the radio is receiving the Control Channel for the Trunked Bank being loaded. If the

Control Channel is not being received by the radio an error message will be displayed

indicating that the Trunked Bank cannot be loaded with Talkgroup IDs from the radio.

This button is disabled if no radio is connected.

o *Clear All ScanLists* Button - Click to initialize the ScanList Location data for all

ScanList Locations in all ScanLists in the currently selected bank.

o Prog 0’s Checkbox – Checked enables the programming of 0 values. Unchecked

disables the programming of 0 values. The default for this control is checked. As

defaulted, when programming TalkGroup IDs into scanner memory ScanControl

programs any 0 Talkgroup ID value along with its alpha tags and other data attributes

during the programming process. If this box is unchecked then 0 values along with their

alpha tags and data attributes are skipped during the programming process. This saves

time during the programming process. A word of caution here … if you uncheck this

box thereby skipping 0 values then any Talkgroup ID values already stored in radio

memory WILL NOT be overwritten during the programming process.

o Clear Tags Checkbox (BCT8, BC245XLT, BC895XLT, BC898T and PRO2052

Only) - Since alphanumeric tags are only stored in the ScanControl Memory Area and

not in the radio memory you have the option of retaining the existing tags or clearing

them whenever you perform a ScanList upload from the radio. Checking the box will

enable tag clearing, un-checking the box will disable tag clearing. The default is to

disable tag clearing. This checkbox is disabled if no radio is connected.

o Pri Loc Drop Down Box – Drop down box used to select the Priority Talkgroup

Location for the selected ScanList. Each ScanList can have one Priority Location.

Selecting the location number in the drop down box sets the P indicator for the ScanList.

The default Priority Location is set to the first location in each ScanList when a New File

is created.

o AFS Checkbox – Agency-Fleet-Subfleet data display. Sets the Talkgroup ID display

mode in the radio. When the box is checked the radio will display Talkgroup IDs in AFS

mode. When the box is unchecked the IDs will display in decimal mode.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 85 86

Comments to this Manuals

No comments

Motorola BC796D User's Guide Page 25

Comments to this Manuals

Related products and manuals for Unknown Motorola BC796D