Motorola CPU32 User's Guide download pdf (Page 194)

CPU32 Emulation 193

Glossary

Analysis Probe A probing solution

connected to the target

microcontroller. It provides an

interface between the signals of the

target microcontroller and the inputs

of the logic analyzer. Formerly called

a “preprocessor.”

Elastomeric Probe Adapter A

connector that is fastened on top of a

target microcontroller using a

retainer and knurled nut. The

conductive elastomer on the bottom

of the probe adapter makes contact

with pins of the target

microcontroller and delivers their

signals to connection points on top of

the probe adapter.

Emulation Module An emulation

module is installed within the

mainframe of a logic analyzer. It

provides run control within an

emulation and analysis test setup.

See Emulation Probe.

Emulation Probe An emulation

probe is a standalone instrument

connected via LAN to the mainframe

of a logic analyzer or to a host

computer. It provides run control

within an emulation and analysis test

setup. Formerly called a “processor

probe” or “software probe.” See

Emulation Module.

Emulator An emulation module or

an emulation probe.

Extender A part whose only

function is to provide connections

from one location to another. One or

more extenders might be stacked to

raise a probe above a target

microprocessor to avoid mechanical

contact with other components

installed close to the target

microcontroller. Sometimes called a

“connector board.”

Flexible Adapter Two connection

devices coupled with a flexible cable.

Used for connecting probing

hardware on the target

microcontroller to the analysis probe.

General-Purpose Flexible

Adapter A cable assembly that

connects the signals from an

elastomeric probe adapter to an

analysis probe. Normally, a male-to-

male header or transition board

makes the connections from the

general-purpose flexible adapter to

the analysis probe.

High-Density Adapter Cable A

cable assembly that delivers signals

from an analysis probe hardware

interface to the logic analyzer pod

cables. A high-density adapter cable

has a single Mictor connector that is

installed into the analysis probe, and

two cables that are connected to

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 204 205

Comments to this Manuals

No comments