Motorola CPU32 User's Guide Page 173

  • Download
  • Add to my manuals
  • Print
  • Page
    / 205
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 172
172 CPU32 Emulation
Chapter 11: Troubleshooting the Emulator
Problems with the LAN Interface (Emulation Module Only)
Problems with the LAN Interface (Emulation
Module Only)
If LAN communication does not work
If you cannot verify the connection, or if the commands are not
accepted by the emulation module:
Make sure that you wait for the power-on self test to complete before
connecting.
Make sure that the LAN cable is connected. Watch the LAN LED’s on the
back of the logic analysis system to see whether the system is seeing LAN
activity. Refer to your LAN documentation for testing connectivity.
Check that the host computer or debugger was configured with the correct
LAN address. If the logic analysis system is on a different subnet than the
host computer, check that the gateway address is correct.
Make sure that the logic analysis system’s IP address is set up correctly.
Refer to the online help in the logic analysis system for more information.
If it takes a long time to connect to the network
Check the subnet masks on the other LAN devices connected to your
network. All of the devices should be configured to use the same subnet
mask.
Subnet mask error messages do not indicate a major problem. You can
continue using the emulation module.
The subnet mask is set in the logic analysis system’s System Admin
window. If it then detects other subnet masks, it will generate error
messages.
Page view 172
1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 204 205

Comments to this Manuals

No comments