Motorola MC3000 Specifications Page 66

  • Download
  • Add to my manuals
  • Print
  • Page
    / 216
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 65
2 - 30 MC3000 Integrator Guide
Figure 2-39
Serial Connection Setting
9. Tap OK to save any changes made.
10. Connect the device to the host computer. See Figure 2-1 on page 2-3 to set up a Single Slot Serial/USB cradle,
or see Figure 2-16 on page 2-18 for cable connections.
11. Upon connection, synchronization occurs automatically.
USB Connection Setup
The USB communication setup is used to set up to communicate between the host and the mobile computer using
either a Single Slot Serial/USB cradle or using one of the serial MC3000 Communication/Charge cables.
1. On the mobile computer, tap > Settings > Control Panel > PC Connection icon. The PC Connection
Properties window appears.
Figure 2-40
PC Connection Properties Window
2. Tap the Change Connection button.
NOTE Every mobile computer should have a unique device name. Never try to synchronize more than one mobile
computer to the same name.
NOTE The cradle requires a dedicated port. It cannot share a port with an internal modem or other device. Refer to
the host computer documentation to locate the serial port(s).
NOTE For serial communication using the Single Slot Serial/USB cradle, connect only the USB cable, do not connect
both the USB cable and the serial cable. If both serial and USB communication cables are required, the host
computer USB port is the default setting in ActiveSync.
Page view 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 215 216

Comments to this Manuals

No comments