Motorola MC3000 Specifications download pdf (Page 136)

7 - 34 MC3000 Integrator Guide

Figure 7-40

ICMP Ping Window

To perform an ICMP ping:

1. In the IP field, enter an IP address or select an IP address from the drop-down list.

2. From the Size drop-down list, select a size value.

3. Tap Start Test. The ICMP Ping test starts. Information of the ping test displays in the appropriate fields.

Trace Route Window

Trace Route traces a packet from a computer to a host, showing how many hops the packet requires to reach the

host and how long each hop takes. The

Trace Route utility identifies where the longest delays are occurring.

The

Trace Route window allows a user to test a connection at the network layer (part of the IP protocol), between

the mobile computer and any place on the network.

To open the

Trace Route window, tap Trace Route in the Wireless Diagnostics window. The Trace Route window

displays.

Figure 7-41

Trace Route Window

A user can enter an IP address or a DNS Name in the IP combo box, and tap Start Test. The IP combo box should

match the same information as shown in the

ICMP Ping window’s IP combo box. When a test is started, the trace

route attempts to find all routers between the mobile computer and the destination. The Round Trip Time (RTT)

between the mobile computer and each router is shown, and then the total test time is also shown. The total test

time may be longer than all RTTs added together because it is not just including time on the network.

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 215 216

No comments

Motorola MC3000 Specifications Page 136