Motorola DIGITAL DS6708 User Manual download pdf (Page 41)

Maintenance & Technical Specifications 3 - 3

Digital scanner decodes bar

code, but does not transmit the

data to the host.

Digital scanner is not programmed for

the correct host type.

Scan the appropriate host type

programming bar code. See the

chapter corresponding to the host type.

Interface cable is loose. Re-connect the cable.

If 4 long low beeps are heard, a

transmission error occurred.

Set the digital scanner's

communication parameters to match

the host's setting.

If 5 low beeps are heard, a conversion

or format error occurred.

Configure the digital scanner's

conversion parameters properly.

If low/high/low beeps are heard, an

invalid ADF rule is detected.

Program the correct ADF rules.

If high/low beeps are heard, the digital

scanner is buffering Code 39 data.

Normal scanning a Code 39 bar code

and the Code 39 Buffering option is

enabled.

Host displays scanned data

incorrectly.

Digital scanner is not programmed to

work with the host.

Scan the appropriate host type

programming bar code.

For RS-232, set the digital scanner's

communication parameters to match

the host's settings.

For a Keyboard Wedge configuration,

program the system for the correct

keyboard type, and turn off the CAPS

LOCK key.

Program the proper editing options

(e.g., UPC-E to UPC-A Conversion).

Digital scanner emits

high/high/high/low beeps when

not in use.

RS-232 receive error. Normal during host reset. Otherwise,

set the digital scanner's RS-232 parity

to match the host setting.

Digital scanner emits low/high

beeps during programming.

Input error or

Cancel

bar code was

scanned.

Scan the correct numeric bar codes

within range for the parameter

programmed.

Digital scanner emits

low/high/low/high beeps during

programming.

Out of ADF parameter storage space. Erase all rules and re-program with

shorter rules.

The digital scanner may be out of

Synapse parameter storage space.

Scan

Set Synapse Defaults

bar code

for cables no longer in use and

re-program the digital scanner for the

current host interface.

Table 3-1

Troubleshooting (Continued)

Problem Possible Causes Possible Solutions

1 ... 40 41 42 ... 458

Comments to this Manuals

No comments