Motorola DIGITAL DS6708 User Manual download pdf (Page 33)

100

101

Scanning 2 - 5

4. Center the symbol in any orientation within the aiming pattern. Be sure the entire symbol is within the

rectangular area formed by the brackets in the pattern.

Figure 2-12

Centering Symbol in Aiming Pattern

5. Hold the trigger until the digital scanner beeps, indicating the bar code is successfully decoded. For more

information on beeper and LED definitions, see Table 2-1 and Table 2-2.

This process usually occurs instantaneously. Steps 2 - 4 are repeated on poor quality or difficult bar codes, until the

bar code decodes, you release the trigger, or the Decode Session Timeout occurs.

Aiming

Hold the digital scanner between two and nine inches (depending on symbol density; see Decode Zones on page

2-8) from the symbol, centering the aiming pattern cross hairs on the symbol.

The aiming pattern is smaller when the digital scanner is closer to the symbol and larger when it is farther from the

symbol. Scan symbols with smaller bars or elements (mil size) closer to the digital scanner, and those with larger

bars or elements (mil size) farther from the digital scanner.

The digital scanner can also read a bar code presented within the aiming pattern but not centered. The top

examples in Figure 2-13 show acceptable aiming options, while the bottom examples can not be decoded.

Figure 2-13

Acceptable and Incorrect Aiming

Linear bar code

PDF417 symbol

Symbol

Aiming Pattern

1D bar code

2D bar code

012345

1 ... 32 33 34 ... 458

Comments to this Manuals

No comments

Motorola DIGITAL DS6708 User Manual Page 33

Comments to this Manuals

Related products and manuals for Scanners Motorola DIGITAL DS6708