Motorola DIGITAL DS6708 User Manual download pdf (Page 186)

13 - 10 Symbol DS6708 Digital Scanner Product Reference Guide

Decode UPC/EAN/JAN Supplementals

Parameter # 10h

Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN

13+2). The following options are available:

•

If you select Ignore UPC/EAN with Supplementals, and the scanner is presented with a UPC/EAN plus

supplemental symbol, the scanner decodes UPC/EAN and ignores the supplemental characters.

•

If you select Decode UPC/EAN with Supplementals, the scanner only decodes UPC/EAN symbols with

supplemental characters, and ignores symbols without supplementals.

•

If you select Autodiscriminate UPC/EAN Supplementals, the scanner decodes UPC/EAN symbols with

supplemental characters immediately. If the symbol does not have a supplemental, the scanner must decode

the bar code the number of times set via UPC/EAN/JAN Supplemental Redundancy on page 13-13 before

transmitting its data to confirm that there is no supplemental.

•

If you select one of the following Supplemental Mode options, the scanner immediately transmits EAN-13

bar codes starting with that prefix that have supplemental characters. If the symbol does not have a

supplemental, the scanner must decode the bar code the number of times set via UPC/EAN/JAN

Supplemental Redundancy on page 13-13 before transmitting its data to confirm that there is no

supplemental. The scanner transmits UPC/EAN bar codes that do not have that prefix immediately.

• Enable 378/379 Supplemental Mode

• Enable 978/979 Supplemental Mode

• Enable 977 Supplemental Mode

• Enable 414/419/434/439 Supplemental Mode

• Enable 491 Supplemental Mode

• Enable Smart Supplemental Mode - applies to EAN-13 bar codes starting with any prefix listed

previously.

• Supplemental User-Programmable Type 1 - applies to EAN-13 bar codes starting with a 3-digit

user-defined prefix. Set this 3-digit prefix using User-Programmable Supplementals on page 13-13.

• Supplemental User-Programmable Type 1 and 2 - applies to EAN-13 bar codes starting with either of

two 3-digit user-defined prefixes. Set the 3-digit prefixes using User-Programmable Supplementals on

page 13-13.

• Smart Supplemental Plus User-Programmable 1 - applies to EAN-13 bar codes starting with any prefix

listed previously or the user-defined prefix set using User-Programmable Supplementals on page 13-13.

• Smart Supplemental Plus User-Programmable 1 and 2 - applies to EAN-13 bar codes starting with any

prefix listed previously or one of the two user-defined prefixes set using User-Programmable

Supplementals on page 13-13.

NOTE If you select 978/979 Supplemental Mode and are scanning Bookland EAN bar codes, see

Enable/Disable Bookland EAN on page 13-9 to enable Bookland EAN, and select a format using

Bookland ISBN Format on page 13-21.

NOTE To minimize the risk of invalid data transmission, select either to decode or ignore supplemental

characters.

1 ... 185 186 187 ... 458

Comments to this Manuals

No comments

Motorola DIGITAL DS6708 User Manual Page 186

Comments to this Manuals

Related products and manuals for Scanners Motorola DIGITAL DS6708