96 Trunked Radio Features Operation
(cont.)
MAEPF-22628-O
A, T, C, D
96
Call Alert Page Operation (cont.)
Answering a Call Alert Page With an Enhanced
Private Conversation Call (900 MHz Only)
1. When a Call Alert page is being received, you will
hear a recurring four-beep tone until the call is
answered or the radio is reset. The display will
alternate between showing the current talkgroup
and “PAGE RECEIVED.” The green LED and the call
received status annunciator will flash to indicate
that a page is being received.
Note: Any button press, keypad press, or mode
change except for the light button or volume
control will turn the Call Alert audible and visual
indicators off.
2. Press the call response button or the call button
(both programmed via the RSS), or press the right
arrow key until the display shows “CALL,” then
press the key below “CALL.” The display will show
the ID number of the radio that paged you.
3. Press the PTT switch to transmit the ID number. If
the radio you are calling is on the air, you will hear
telephone-type ringing for 20 seconds, or until the
radio you are calling answers the call. The ID
number of the calling radio is stored as the “last ID
number transmitted or received.”
Note: If the radio you are calling
is not in service
,
you will not hear the ringing. Go to step 6 of this
procedure to hang up.
4a. If the party you are calling
does not answer
the call
within 20 seconds, the display will show “NO
ACKNOWLEDGE”; the ringing will stop and an alert
tone will sound. Go to step 6 of this procedure to
hang up.
or
4b. If the party you are calling
does answer
the call,
you will hear his/her voice.
5. Press the PTT switch to carry on a Private
Conversation will the called person
6. When you have finished your conversation, or if the
radio you are calling does not answer or is not in
service, press the HOME key or the page button
(normally side button 2) to hang up. The radio will
return to the home display.
2
ABC
1
3
DEF
6
MNO
5
JKL
4
GHI
7
PRS
8
TUV
9WXY
0
HOME
Comments to this Manuals