Motorola III User Manual download pdf (Page 73)

Conventional Radio Features

Operation (cont.)

Stat-Alert Selective Call

Selective Call is another method of unmuting a radio with other than PL

codes. Radios with Selective Call may be programmed to unmute one of two ways:

1. (OR muting option) upon receiving proper PL code or a Selective Call, or

2. (AND muting option) upon receiving both proper PL code and Selective

Call

Making a Selective Call

Either press the “call” button or select PRIVATE CALL from the menu. The

last transmitted or received ID is displayed. You can select the ID you wish to

call by scrolling forward with the arrow keys to select an ID from the call list.

You may also scroll backward with the arrow keys to show the last group ID

called, your own radio ID and your own radio group ID. If unlimited calling is

allowed, you may enter an ID from the keypad.

Note: Keypad entry only applies to Model III.

To transmit a call to the selected ID, press the PTT. If automatic Selective Call

is enabled, your radio will remain in Selective Call until you exit. If automatic

Selective Call is disabled in your radio, the radio will immediately exit Selective

Call when you release the PTT.

Receiving a Selective Call

When receiving a selective call, your radio will generate the call received tone

and display “CALL RECEIVED” momentarily. The Selective Call voice will then

be heard.

If OR muting is programmed into your radio, your radio will unmute whenever

it receives proper PL or a Selective Call.

If AND muting is programmed into your radio, your radio must receive proper

PL and a Selective Call to unmute. For a pre-programmed time after receiving

a Selective Call, your radio will unmute on proper PL. After this pre-

programmed time, another Selective Call with proper PL will be required to

unmute the radio.

1 ... 72 73 74 ... 127

No comments

Motorola III User Manual Page 73