Motorola III User Manual download pdf (Page 19)

18 Basic Radio Operation (cont.)

Receiving a Call

Conventional Modes

1. Turn the radio on and select the desired zone and mode (see “Selecting a

Zone and Mode”).

2. Listen until you hear a transmission, then adjust the volume control for a

comfortable listening level.

Or, if a button is programmed for “volume set,” press this button and adjust

the volume to a comfortable listening level.

Notes:

• The squelch opening level setting may be reprogrammed at an

authorized service facility.

• MTS 2000 SECURENET-equipped radios automatically determine

whether a SECURENET or clear voice message is being received. This

allows you to receive either type of message without having to reset the

two-position concentric switch.

3. Your radio is now set to receive calls on the selected mode.

4. Refer to the Coded Squelch paragraph of the “General Radio Features

Operation” section for Tone Private-Line

(PL), Digital Private-Line™ (DPL)

operation.

Note: A mode-busy feature is available; the red LED will blink when your radio

is receiving to indicate that the mode is busy. The radio will not unmute if the

mode is busy with a coded-squelch message that is not intended for you (see

“Coded Squelch Operation”).

Trunked Systems

1. Turn the radio on and select the desired zone and mode (see “Selecting a

Zone and Mode”).

2. Listen until you hear a transmission, then adjust the volume control for a

comfortable listening level, or, if your radio is so programmed, use the

“volume set” feature as discussed in step 2 of “Conventional Modes.”

Note: MTS 2000 SECURENET-equipped radios automatically determine

whether a SECURENET or clear voice message is being received. This allows

you to receive either type of message without having to reset the two-position

concentric switch.

3. Your radio is now set to receive calls on the selected zone and mode.

1 ... 18 19 20 ... 127

No comments

Motorola III User Manual Page 19