36 General Radio Features Operation
(cont.)
MAEPF-22627-A (S, T)
MAEPF-22627-O(R)
MAEPF-22627-A (U)
MAEPF-22627-O (D)
36
Programming the Radio’s Lists (cont.)
6. Press the “select” key (programmed via the RSS) to
enter the number-edit mode. The display shows the
current member’s telephone number. You can now
change numbers, using any of the numeric (0 – 9)
keys, as well as the “*” and “#” keys. The blinking
cursor indicates the position of the next number to
be added.
Some telephone networks require a pause in the
phone dialing sequence to allow for delays in the
telephone switches. A pause character can be
placed in the 16-digit number by first pressing the
“*” key, then pressing the “#” key. The display will
show a “P” for pause.
Note: In this mode, the left arrow key ( ) will
function as a backspace key. Pressing this key will
erase the previous digit, and the cursor will move
to the left. When the last digit on the display has
been erased, an additional press of this key or the
right arrow key ( ) will cause you to leave the
number-edit mode without making any changes,
and re-enter the procedure at step 5.
7. Begin changing the telephone number. The display
shows the numbers as they are entered; the
cursor flashes to indicate the location of the next
number to be entered. When the maximum
number of digits (16) have been entered, the
cursor will disappear. If you try to add any more
digits, you will hear an invalid (bad) keypress alert
tone.
8. When you have finished changing the telephone
number, press the select key again; the change is
saved in the radio’s memory and you are returned
to step 5. The display will again alternate between
showing the member’s name and telephone
number; you can change additional numbers from
this point.
9. When you have finished making changes, press the
HOME key to exit the program mode. The radio will
return to the home display.
2
ABC
1
3
DEF
6
MNO
5
JKL
4
GHI
7
PRS
8
TUV
9WXY
0
HOME
Comments to this Manuals