SB6120-1.0.2.4-SCM01 Customer Release Notes
Motorola 365-095-13135
Sheet 5 of 20 Printed Copies of this Document are Not Controlled Revision X.2
8. UPDATES IN THIS RELEASE
8.1. 1.0.2.4-SCM01
8.1.1. Reference Code Merge
• This newest firmware release includes all fixes and enhancements available in the TI Reference
Code drops up through v1.4.2.20. (cqvds00017476)
8.1.2. Features
• Added GUI and SNMP Log Messages for various CM restarts the unit could encounter.
(cqvds00016226)
)
Cable Modem Reboot from GUI/Configuration page
)
Cable Modem Reboot from CLI
)
Cable Modem Reboot from SNMP
)
Cable Modem Reboot due to T4 timeout
)
Cable Modem Reboot from shell
)
Cable Modem Reboot due to power reset
)
Cable Modem Reboot due to MDD Loss
)
Cable Modem Reboot due to IP loss
)
Cable Modem Reboot due to partial service
)
Cable Modem Reboot due to bonding recovery
)
Cable Modem Reboot due to Software upgrade
• Updated how the cmSnmpDisplayHtml MIB object is handled, as the set value is not stored in
non-vol. If the MIB is set to "false" via a config file, the user is unable to access the internal
HTML pages when the modem is registered. However, if the modem goes through a full reset (or
power on reset), this OID reverts back to "true" so the HTML pages are accessible up until
registration time, helping installers and technicians troubleshoot registration issues.
(cqvds00012806)
• The SB6120 upstream channel selection criterion was changed to conform to the DOCSIS 2.0
specification, so that when operating on a single upstream channel, the CM will select an ATDMA
channel when available. (cqvds00017956)
• Customized support for IPv6/IPv4 stack on the SB6120. (cqvds00018472, cqvds00018473,
cqvds00018474, and cqvds00018829)
)
Added the MIB Object cmMotVendorMDDHonorIp
• DESCRIPTION
0 – indicates that the device MUST honor the IP Mode MDD TLV transmitted by the CMTS on the
access network.
1 – indicates that the device MUST only attempt initialization IPv4 mode.
2 – indicates that the device MUST only attempt initialization in IPv6 mode.
3 – indicates that the device MUST attempt initialization using APM.
4 – indicates that the device MUST attempt initialization using DPM.
The default value for theMddIpModeOverride TLV is not specified.
This value is stored in NVRAM"
• Improved the performance of the SB6120 Downstream FTP Speed Test Feature. (cqvds00019010)
• The SB6120 Downstream FTP Speed Test Application Counters will be cleared when a test is in
progress. (cqvds00019037)
)
The SB6120 will now reset the counters cmTestFtpTransferPayloadBytes,
cmTestFtpTransferTotalBytes, cmTestFtpTransferElapsedTime, and
cmTestFtpTransferThroughput before starting the FTP test.
8.1.3. Defects Fixed
• The SB6120 modem gracefully recovers from a cable-cut when on an SCDMA upstream and the
pre-equalizer is enabled. (cqvds00019368)
(21 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals