Motorola CABLE MODEM SB6100J - GUIDE Specifications download pdf (Page 20)

SB6120-1.0.2.4-SCM01 Customer Release Notes

Motorola 365-095-13135

Sheet 20 of 20 Printed Copies of this Document are Not Controlled Revision X.2

• The SB6120 now allows cmConfigFreq MIB objects to store frequencies up to 1GHz.

(cqvds00009150)

• In order to support higher downstream frequencies, the SB6120E continues to scan in 250 KHz

steps from 860 MHz to 1GHz after the legacy North American or European scan plan is complete.

(cqvds00009009)

• Support has now been added for the docsIfSigQSignalNoise OID. (cqvds00008909)

9.17.2. Defects Fixed

• Resolved an issue where after successfully setting some objects in the CM-CONFIG-MIB,

querying the same OID may return a “no such instance” message. (cqvds00008531)

• Previously, under some conditions setting cmFreq1, cmFreq2, and cmFreq3 could prevent the

SB6120 from scanning additional downstream frequencies. (cqvds00009112)

• The SB6120 modem will now process upstream UCDs using the following logic: The modem will

build a list of available UCDs and attempt to register on the cached UCD first. If that channel is

not available or there is no cached UCD, the modem will first select an A-TDMA/S-CDMA

channel, next an M-TDMA channel, and finally a TDMA channel. (cqvds00008046)

• docsDevSwCurrentVers now properly reports the firmware version and build number.

(cqvds00008764)

• Resolved typographical errors found in the event log message for “DHCP Renew - lease

parameters modified". (cqvds00008201)

• The SB6120 now uses the default docsDevFilterIpIfIndex of “1” (previously it was “0”) to ensure

compatibility with a provider’s existing IP Filter implementation in CM configuration files.

(cqvds00008013)

• An issue has been fixed where an SB6120 may not re-register upon loss of a downstream.

(cqvds00008894)

9.18. 1.0.0.1-SCM00

9.18.1. Features

• Support added for a firmware check to prevent newer hardware from downloading older

incompatible firmware. (cqvds00008628)

• Added Euro Bonding and Hybrid support. The CM can now become operational using Euro RCP.

In addition, the SB6120E with Hybrid mode enabled will scan for Euro-256QAM, Euro-64QAM,

US-256QAM, and US-64QAM. (cqvds00008588)

9.18.2. Defects Fixed

• none

1 ... 19 20

No comments

Motorola CABLE MODEM SB6100J - GUIDE Specifications Page 20