Motorola WPS870G User Manual download pdf (Page 88)

User Guide WPS870G

PAGE 81

Unix

Troubleshooting

Print Server is not recognized.

Check the following:

 The network cable is OK.

 There are no routers between the Print Server and the UNIX host during IP address

assignment.

 There are no NetWare File Servers without TCP/IP support between the Print Server

and the UNIX host.

 You have used the correct hardware address, as shown on a sticker on the base of the

device.

 Use the ping command to see if the Print Server is a valid device on the network.

The Print Server’s IP address is forgotten and it needs to be installed in a new environment.

Use the Restore button to restore the factory default settings, as described below, then

configured as a new device. See

Test Print and Restore Button for details on resetting it.

1 ... 87 88 89 ... 115

No comments

Motorola WPS870G User Manual Page 88