Motorola WPS870G User Manual download pdf (Page 41)

WPS870G User Guide

PAGE 34

Section 4: Web-Based Management

This section explains how to configure the WPS870G using your Web browser.

Overview

The WPS870G uses an HTTP server, which allows you to connect to the Wireless Print

Server and configure it using your web browser. Most browsers should work, provided they

support tables and forms. You use an IP address to log on to the Print Server’s Web-based

Management Utility.

Preparation

Because the WPS870G supports dynamic IP address allocation using DHCP, BOOTP, or

RARP, the WPS870G ships with an IP address of 0.0.0.0. This is not a valid IP address.

Therefore, read the following flowchart to learn what you need to do:

Check your DHCP server

(if you have one) and

determine the IP address

allocated to the

WPS870G.

Use the Installation

Wizard on the CD-ROM

to allocate a valid IP

address to the WPS870G.

Use the Restore Button to print a report

that includes the current IP address

(press and release the Restore Button).

If the IP address is not valid, then choose

one of these two options:

If you are required to allocate an IP address for your WPS870G, refer to

IP Assignment for

details.

1 ... 40 41 42 ... 115

No comments

Motorola WPS870G User Manual Page 41