Motorola WPS870G User Manual download pdf (Page 28)

User Guide WPS870G

PAGE 21

The Add Printer Wizard window is displayed:

6 Select the newly added Port. Look for the description of “PrintServer” because your

installation will vary. In the example above, P2 represents the second Port (USB) on the

WPS870G. Once selected, click Next.

7 Keep or replace the driver as needed and click Next. The Name Your Printer window is

displayed. Motorola recommends changing the Printer name to indicate that this printer

is attached to your Wireless Print Server.

8 Click Next and the Printer Sharing window is displayed.

9 Click “Do not share this printer” and click Next.

10 Click Yes or No to print a Test Page and click Next.

11 Click Finish to complete the Print Utility setup. Your Wireless Print Server is now ready

to be used. To print from an application, select the printer you have just configured from

the Print dialog box of the application.

12 If the Printer Port Setup window is still open, you can set up another printer or click

Close to exit the window.

After you have finished the initial installation setup program on the CD-ROM, your

WPS870G is up and running and ready for advanced wireless configuration. See

Section 3:

Wireless Security Configuration for configuring the strongest security settings and

Section 4: Web-Based Management for configuring the WPS870G.

1 ... 27 28 29 ... 115

No comments

Motorola WPS870G User Manual Page 28