Motorola MC50 Specifications Page 137

  • Download
  • Add to my manuals
  • Print
  • Page
    / 176
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 136
Maintenance & Troubleshooting 6 - 7
Cable Adapter Module
Magnetic Stripe Reader
Table 6-5
Troubleshooting the Cable Adapter Module
Symptom Possible Cause Action
Mobile computer
battery is not charging.
CAM was removed from
mobile computer or CAM
was unplugged from AC
power too soon.
Ensure CAM is attached correctly and receiving power.
Confirm main battery is charging under
Start
>
Settings
>
System
>
Power
. The standard battery requires
approximately 3.5 hours and the extended capacity
battery requires approximately seven hours to charge.
Battery is faulty. Verify that other batteries charge properly. If so, replace
the faulty battery.
CAM is not fully attached
to the mobile computer.
Reattach CAM to the mobile computer.
During data
communication, no
data was transmitted,
or transmitted data
was incomplete.
CAM removed from
mobile computer during
communication.
Reattach CAM to mobile computer and retransmit.
Incorrect cable
configuration.
See the System Administrator.
Communication software
is not installed or
configured properly.
Perform setup as described in
Chapter 3, ActiveSync
.
Table 6-6
Troubleshooting the Magnetic Stripe Reader
Symptom Possible Cause Action
MSR does not read
card.
MSR removed from
mobile computer during
card swipe.
Reattach MSR to mobile computer and reswipe the card.
Faulty magnetic stripe on
card.
See the System Administrator.
MSR application is not
installed or configured
properly.
Ensure the MSR application is installed on the mobile
computer. Ensure the MSR application is configured
correctly.
Page view 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 175 176

Comments to this Manuals

No comments