Motorola MC50 Specifications Page 48

  • Download
  • Add to my manuals
  • Print
  • Page
    / 176
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 47
2 - 22 MC50 with Windows
®
Mobile 5.0 Integrator Guide
Cable Adapter Module
This section describes how to set up and use the snap-on CAM with the mobile computer. The CAM snaps on
to the bottom of the mobile computer and can be easily removed when not in use.
Figure 2-25
Cable Adapter Module
When attached to the mobile computer, the CAM:
Provides power for operating the mobile computer, with the appropriate power connection.
Provides Ethernet connection through the Ethernet port for communication with an Ethernet device, such
as a host computer or Ethernet hub. For communication setup procedures, see Chapter 3, ActiveSync.
Charges the mobile computer’s battery, when used with the appropriate power supply.
Attaching and Removing
To attach, slide the CAM onto the bottom of the mobile computer, until it snaps into place.
Figure 2-26
CAM Installation
Power Port
Communications Port
NOTE Use only a Motorola-approved power supply (p/n 50-14000-147) output rated 5.4 Vdc and minimum 3A.
The power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will
invalidate any approval given to this device and may be dangerous.
HINWEIS Benutzen Sie nur eine von Motorola genehmigte Stromversorgung (Teilenr. 50-14000-147) mit einer
Ausgangsleistung von 5.4 V (Gleichstrom) und mindestens 3A. Die Stromversorgung ist nach EN60950
für die Verwendung in SELV-Stromkreisen zertifiziert. Bei Verwendung eines anderen Netzteils werden
alle für das Gerät gewährten Genehmigungen außer Kraft gesetzt, und der Betrieb kann gefährlich sein.
Page view 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 175 176

Comments to this Manuals

No comments