Motorola EX500 User's Guide download pdf (Page 25)

23

English

SCAN

SCAN

You can monitor several channels in order to

receive any call that is transmitted on any of

these channels. Sixteen different channels can

be programmed into a scan list. Each channel

can share the same scan list or have different

scan lists assigned to them.

Once the radio’s scan operation is activated

and the radio detects a call coming through a

channel in its scan list, it switches to that

channel for you to receive the call.

STARTING OR STOPPING A SCAN

OPERATION

The LED Indicator will blink (green) during a

scan operation. It will stop blinking when the

radio switches to a channel.

TALKBACK

If the programmable Talkback option is set, you

can respond to any calls received during the

scan operation by pressing the PTT button

before the programmed hang-time ends.

Check with your dealer for details.

DELETING A NUISANCE CHANNEL

If a channel continually generates unwanted

calls/noise, you can temporarily remove it from

the scan list by performing a Nuisance

Channel Delete operation.

Note: You cannot perform a Nuisance Chan-

nel Delete on a priority channel or if

there is only one remaining channel in

the scan list.

1

Press the Scan button (see page 17) to start

a scan operation.

2

Press the Scan button again to stop the scan

operation.

1

While the radio is on the Nuisance Channel,

press and hold the Scan button (see page

17

) until you hear a tone.

2 Release the Scan button.

05_Scan.fm Page 23 Friday, July 22, 2005 11:13 AM

1 ... 24 25 26 ... 38

Comments to this Manuals

No comments