Motorola EX500 User's Guide download pdf (Page 18)

English

GETTING STARTED

Attaching the Side Connector Cover

TURNING THE RADIO ON OR OFF

1 Place the loop (attached to the side connector

cover) over the antenna; then slide it down-

ward until it touches the top of the radio.

2 Insert the tab on the top of the cover into the

slot above the connector.

3 Position the cover over the connector and

align the thumbscrew with the threaded hole

in the radio.

4 Tighten the thumbscrew to hold the cover in

place. Do not overtighten the thumbscrew.

Thumbscrew

Loop

Antenna

Slot

1 Tur n the On/Off/Volume (see page 15) knob

clockwise to turn on the radio. You will hear

the Self Test Pass Tone and see a green

LED if the radio powers up successfully. If

the radio fails to power up, you will hear the

Self Test Fail Tone.

2 Tur n the On/Off/Volume knob (see page 15)

counter-clockwise, until a click is heard, to

turn off the radio.

ON OFF

03_GettingStarted.fm Page 16 Friday, July 22, 2005 11:12 AM

1 ... 17 18 19 ... 38

No comments

Motorola EX500 User's Guide Page 18