Motorola P8190 Service Manual download pdf (Page 67)

55

Motorola Conﬁdential Proprietary

Introduction

To perform most repairs, the unit must be

disassembled in order to gain access to the

various internal components. Reasonable

care should be taken in order to avoid

damaging or stressing the housing and

internal components. Motorola recommends

the use of a properly grounded high imped-

ance conductive wrist strap while

performing any of these procedures.

CAUTION

Many of the integrated circuit

devices used in this equipment

are vulnerable to damage from

static charges. An anti-static

wrist band, connected to an

anti-static (conductive) work

surface, must be worn during all

phases of disassembly, repair,

and reassembly.

Recommended Tools

The following tools are recommended for

use during the disassembly and reassembly

of the StarTAC.

¥ Anti-Static Mat Kit (RPX-4307A);

includes:

Ñ Anti-Static Mat 66-80387A959

Ñ Ground Cord 66-80387A989

Ñ Wrist Band 42-80385A59

¥ Plastic Prying Tool SLN7223A

¥ Antenna Tool SYN5179A

¥ Tweezers

¥ Disassembly Fixture 8185677C02

Transceiver Disassembly

The preferred method for transceiver disas-

sembly is using the disassembly fixture.

Refer to page 17 for step by step instruc-

tions on using the disassembly fixture.

NOTE

Service personnel should be

familiar with all of the following

information before attempting

unit disassembly.

Disassembly

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 148 149

Comments to this Manuals

No comments