Motorola P8190 Service Manual Page 65

  • Download
  • Add to my manuals
  • Print
  • Page
    / 149
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 64
Motorola Confidential Proprietary
Test ProceduresService Manual
53
EVM Measurements
DIGITAL MEASUREMENTS
DTC Meas
Pwr Gain
Auto
/ Hold
Traffic Chan
333
Slot
DVCC
1
To Screen
CALL CNTL
CALL CNFG
ANLG MEAS
SPEC ANL
DIG MEAS
More
EVM 1
Amplitude
-50.0
dBm
1
Frequency Error
%
3.9683
EVM
kHz
0.0081
dB Peak EVM
%
TX Power
-2.35879
11.6270
20 dB
Trig Type
2X Frame
Figure 40. Digital Measurements Screen
TX Frequency Error Measurement Test
1 Make sure the Test Set is in Active
mode.
2 Select DIG MEAS from the To
Screen.
3 Select the DTC Meas field. This
shows the To Screen with a list of
available tests.
4 Select EVM 1. EVM 10 can also be
selected, it measures a 10 burst aver
age.
5 Traffic Chan should be set to 333.
6 Put the mobile into test mode.
7 EVM is displayed.
Test Mode Commands:
1 Enter 575# (Digital signaling mode)
2 11333# (Loads synthesizer Channel)
3 Display prompt Y (enter time slot)
4 Set power level to step 2 (122#)
5 Turn on transmitt carrier (05#)
The 10 burst average EVM measured should
be less than or equal to 10%.
You can also use Digital Call processing to
make these measurements.
EVM Measurements
Page view 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 148 149

Comments to this Manuals

No comments