Motorola ET1 User's Guide download pdf (Page 102)

10 - 4 ET1 Enterprise Tablet User Guide

3. Rub the cotton portion of the cotton-tipped applicator back-and-forth across the connector on the bottom of

the ET1. Do not leave any cotton residue on the connector.

4. Repeat at least three times.

5. Use the cotton-tipped applicator dipped in alcohol to remove any grease and dirt near the connector area.

6. Use a dry cotton-tipped applicator and repeat steps 4 through 6.

7. Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch away from the

surface.

8. Inspect the area for any grease or dirt, repeat if required.

Cleaning Cradle Connectors

To clean the connectors on a cradle:

1. Remove the DC power cable from the cradle.

2. Dip the cotton portion of the cotton-tipped applicator in isopropyl alcohol.

3. Rub the cotton portion of the cotton-tipped applicator along the pins of the connector. Slowly move the

applicator back-and-forth from one side of the connector to the other. Do not leave any cotton residue on

the connector.

4. All sides of the connector should also be rubbed with the cotton-tipped applicator.

5. Spray compressed air in the connector area by pointing the tube/nozzle about ½ inch away from the

surface.

6. Remove any lint left by the cotton-tipped applicator.

7. If grease and other dirt can be found on other areas of the cradle, use a lint-free cloth and alcohol to

remove.

8. Allow at least 10 to 30 minutes (depending on ambient temperature and humidity) for the alcohol to air dry

before applying power to cradle.

If the temperature is low and humidity is high, longer drying time is required. Warm temperature and dry

humidity requires less drying time.

Cleaning Frequency

The cleaning frequency is up to the customer’s discretion due to the varied environments in which the mobile

devices are used. They may be cleaned as frequently as required, but it is advisable to clean the camera

window periodically when used in dirty environments to ensure optimum performance. However when used in

dirty environments it may be advisable to periodically clean the camera window to ensure optimum scanning

performance.

CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face.

CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is pointed away from

your face.

1 ... 101 102 103 ... 126

No comments

Motorola ET1 User's Guide Page 102