Motorola CM300 User Manual download pdf (Page 31)

29

English

SCAN

DELETE A NUISANCE CHANNEL

Note: Your dealer/programmer must prepro-

gram a button to Nuisance Delete to

access this feature.

If a channel continually generates unwanted

calls or noise (a “nuisance” channel), you can

temporarily remove it from the scan list:

Note: You cannot temporarily delete the

channel that has been preprogrammed

by your dealer/programmer as your

designated scan channel, a priority

channel, or the last remaining channel

in the scan list.

Restore Channels to the Scan List

EDIT A SCAN LIST

Your radio can support up to 16 Scan lists.

Each Scan list can contain up to 16 channels.

The same channel can be included in several

Scan lists, and the same Scan list can be

assigned to several channels. Scan lists are

assigned per channel, by your dealer/

programmer. When you edit a Scan list, you

can either add, delete, or prioritize channels.

1 While the radio is on the Nuisance Channel,

press the preprogrammed Nuisance Channel

Delete button until you hear a tone.

2 Release the Nuisance Channel Delete

button. The nuisance channel is deleted.

1 Power off the radio. Once the radio is powered

on again, the deleted nuisance channels are

restored to the scan list.

–or–

2 Press the preprogrammed Scan button to stop

the scan.

3 Press the preprogrammed Scan button again

to start scanning again. The Deleted Nuisance

Channels are restored to the scan list.

–

or –

4 G or H to select a channel that has not

been preprogrammed by your dealer/

programmer to stop Scan. Once you return to

the original channel, the deleted nuisance

channels are restored to the scan list.

04_Scan.fm Page 29 Friday, July 11, 2003 11:31 AM

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 67 68

Comments to this Manuals

No comments