Motorola CM300 User Manual download pdf (Page 30)

English

SCAN

STOP SYSTEM SCAN

Press the preprogrammed Scan button to stop

System Scan (see page 14).

– or –

Note: Your dealer/programmer can preprogram

your radio when exiting System Scan to

automatically revert to the last scan

channel that had activity on it or to

automatically revert to the channel where

scan was initiated.

START AUTO SCAN G

Auto Scan automatically starts scanning once a

channel with Auto Scan enabled is selected.

G or H to select a channel that has been

preprogrammed for Auto Scan by your dealer/

programmer.

STOP AUTO SCAN

G or H to select a channel that has not been

preprogrammed for Auto Scan by your dealer/

programmer.

•The Gsymbol disappears from the display.

4 D to select

The display shows the current scan status.

5 G or H until

6 D to select the current setting.

1 D to enter menu mode.

2 G or H until

3 D to select

The display shows the current scan status.

4 G or H until

5 D to select the current setting.

• The Gsymbol disappears from the

display.

SYS SCAN

SCAN ON

SYS SCAN

SCAN OFF

04_Scan.fm Page 28 Thursday, July 24, 2003 4:18 PM

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 67 68

No comments

Motorola CM300 User Manual Page 30