Motorola CM300 User Manual download pdf (Page 29)

27

English

SCAN

SCAN

Your radio is equipped with the Scan feature,

which allows you to search for, lock onto, and

monitor voice activity on channels. Scan lists

are assigned per channel, by your dealer/

programmer. Your radio automatically switches

to a channel, within that scan list, when it

detects activity. You can also edit these lists

through your radio’s menu (see page 29).

• The green LED indicator blinks during scan

mode; it stops blinking when the radio

switches to an active channel.

•The Gsymbol appears on the display

while in scan mode.

• Your dealer/programmer can preprogram

your radio where if the microphone is taken

off-hook while in Scan mode, the scanning

activity becomes suspended until the

microphone is replaced.

There are two types of Scan available in your

radio:

•System Scan

• Auto Scan

TALKBACK

The Talkback feature allows you to respond to a

transmission while scanning. If transmission is

detected on a channel while scanning, the radio

will stop and land on that channel for a

preprogrammed period of time after activity has

ceased. This is referred to as “hangtime”.

During this hangtime you may respond by

pressing the PTT button.

Note: The LED scan indicator stops blinking

while the radio is in hangtime. If the

PTT button is not pressed after the

preprogrammed hangtime, the radio

reverts back to scan.

START SYSTEM SCAN G

Press the preprogrammed Scan button to start

System Scan (see page 14).

– or –

1 G or H to select a channel that contains a

Scan list.

2

D to enter menu mode.

3 G or H until

SYS SCAN

04_Scan.fm Page 27 Friday, July 11, 2003 11:31 AM

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 67 68

Comments to this Manuals

No comments